Huawei launched the Wi-Fi Q2 Pro router which is designed to create better Wi-Fi coverage at home to provide fast data transmission at high speeds

ِAlthough HUAWEI Wi-Fi supports Gigabit Power Cat chip with innovative PLC Turbo technology that boosts wireless connectivity


broadens the bandwidth at 200Mbps. Furthermore

 The design of the router improves the level of non-interference in PLC wireless networks, thus achieving faster data transfer speed

lower rates of time delay.

It would also support the widespread deployment of modern wireless network technologies


including 200Mbps broadband connection via faster optical fibers.

Huawei’s 5GHz wireless technology and Gigabit communication technology

with Huawei’s PLC Turbo-enabled chip between routers are applied for a theoretical download rate of 1867Mbps with hybrid networks.

On the issue of comprehensive home coverage

the issue previously relied on wireless transmitters, which are significantly weakening on the issue of Internet speeds.

 But with Wi-Fi Mesh

the router supports heterogeneous bands and innovative technology

and in addition, it can automatically switch between the best Wi-Fi bands and an internet hotspot with only a one-time connection.

When the satellite is connected

it will sync the Wi-Fi name and password from the base,

and you do not need any configuration.

The Wi-Fi Q2 Pro router is designed to be installed in areas where the user suffers from the weak wireless signal at home,

 It provides full and strong coverage of all rooms of the house even if the house is spacious and multi-story.


 The router has the advantages of automatic selection of one of two communication ranges, smooth roaming,

and the ability to choose the optimal communication channel automatically.

The router also learns and adapts to the changing Wi-Fi environment daily and automatically optimizes the Wi-Fi channel in real-time to avoid interference.

 He can also remember your internet surfing habits.

The router also reduces interference problems with the network signal,

 It relies on the Gigabit PLC modem chip and PLC Turbo technology to minimize the signal noise level

improves the quality of communications between the primary and secondary routers compared to previous devices,

 Thus, it achieves much higher transmission speeds and significantly lower latency times.

The router supports the next generation of IPv6 network protocols

as IPv6 randomly provides unlimited support for IP addresses for devices connected to collecting IP address prefixes generated by ISP servers

The router consists of three parts

and its price is 999 SAR

 Once the case is opened, you will find the main piece that you will connect directly to the modem through the network port.

 After that, you will have to connect the device to electricity in order to work

After that, you will find red lighting on the router

which means it has not been set up yet.

From here, you will have to download the AI ​​Life app from Huawei on your mobile phone,

 Then you will add the device to set it up quickly and easily through the application. Once set up, the lighting will turn blue.

When this is done,

you will need to take out the second piece and install it in an area that is not far or close to the base piece,

 Then, you will apply it easily until the light turns blue.

The same thing you will do with the third piece.

With that, you won’t have any difficulty with installing and setting up the Wi-Fi Q2 Pro router.


  1. I simply want to mention I’m newbie to blogging and site-building and definitely loved you’re web-site. More than likely I’m going to bookmark your blog . You definitely have beneficial articles and reviews. Appreciate it for sharing with us your website.


Please enter your comment!
Please enter your name here